Description
This kit enables you to convert your SF2 into an SF2H - a variant which is optimised for higher-head applications. This kit is an add-on so you will require an SF2 to use the SF2H conversion kit.
The Futurepump SF2H is a variant of the SF2 pump which is optimised for higher head applications, it is able to reach 25m total head with 120W of solar and 45m total head with 240W of solar.
Please be aware that this high-head variant has a lower flowrate than the SF2 and is suitable for irrigating approximately one acre.
Product details:
- Pump up to 0.4 L/s (1,440 L/hr)
- Maximum suction depth: 7m
- Maximum total head with 120W: 25m
- Maximum total head with 240W: 45m
- Horizontal discharge: Up to 500m
- A replacement pump body for the SF2 optimised for high-lift - an SF2 is required to use the SF2H kit
What's in the kit:
- SF2H pump body to be exchanged for the SF2 pump body (shown in green) within the frame to allow for higher lifting
- SF2H spare parts
Full datasheet for pump: https://reagtools.co.uk/blogs/instructions/futurepump-sf2-datasheet
PLEASE NOTE :
THE OUTLET PIPE HAS A VERY TIGHT CONNECTION WITH THE PUMP, TO HELP WITH THIS WE RECOMMEND THAT THE PIPE IS HEATED FIRST USING ONE OF THE FOLLWING METHODS.
- Either hold the hose pipe in boiling water until it is somewhat soft, then place it on the connector.
- Or use a heat gun or hair dryer to soften the hose pipe from all sides and place it on the connector.
- If nothing else is available a open fire or stove can also be used, but the changes of unequal heating and therefore leakages after placing the connector are bigger.